+84 024 730 13789
Vietnamese
Click Image View Larger

Magnum App

MAGNUM is a bitumen-polymer membrane for waterproofing applications.
Contact for us:
+84 024 730 13789
Share

Product Infomation

MAGNUM is a bitumen-polymer membrane for waterproofing applications.
The BRAI long experience and research have leads to the creation of the MAGNUM APP compound, combined with the last generation of reinforcement in non-woven po- lyester stabilised with glass fibres threads.
The result is a versatile membrane suitable for hot climate conditions with excellent shape and dimensional stability and mechanical properties in this class of pre-fabricated waterproofing torch-on membranes for the most popular applications with the best ratio cost-performances.
MAGNUM membranes can be supplied with top finish in PE film or sand, self-protecting natural or coloured slate chips.

TECHNICAL DATA u. m.

3 mm GR

4 mm GR

Mineral 40 GR
Mineral 45 GR
Mineral 4mm HR   Tolerances
Top finish   PE film / sand mineral chips    
Roll length (EN 1848-1) m 10 10 10 -
Roll width (EN 1848-1) m 1 1 1 -
Thickness (EN 1849-1) mm 3 / 4 - 4 ± 10%
Mass per unit area kg/m² - 4 / 4,5 - ± 10%
Type of carrier   GR Polyester GR Polyester HR Polyester -
Ultimate tensile strenght (EN 12311-1)
Longitudinal resistance at break N/5cm 650 650 800 ± 20%
Longitudinal elongation at break % 40 40 45 ± 15
Transverse resistance at break N/5cm 500 500 700 ± 20%
Transverse elongation at break % 40 40 45 ± 15
Tearing resistance (EN 12310-1)
Maximum longitudinal tearing resistance N 150 150 180 ± 30%
Maximum transverse tearing resistance N 150 150 180 ± 30%
Flexibility at low temperatures (EN 1109) °C ≤ 0 ≤ 0 ≤ 0 -
Shape stability to heat (EN 1110) °C ≥ 120 ≥120 ≥120 -
Dimensional stability at high temperature (EN 1107-1) % ≤ ±0,3 ≤ ±0,3 ≤ ±0,2 -
Water impermeability (EN 1928 – method A) - Pass Pass Pass -
Softening Point (Ring and Ball Test) (ASTM D38-86) °C ≥150 ≥150 ≥150  
Packaging sqm / pallet 300/230 300 / 270 230 -